Operation Manual

IPX in the LAN

87 NT/MPRI – 6 Tips and Troubleshooting

IPX in the LAN

No connections are possible in the LAN.

This problem can arise if there is no Novell server installed in the LAN,

and the frame type is selected automatically on all devices used in the

LAN.

Normally the Novell server determines the frame type, and all the other

devices in the LAN conform to its setting.

If this is the case, the frame type for the computer on which the

NT/MPRI is installed must be selected manually.

6.5 Settings for Incoming Calls

If other CAPI 2.0 applications are installed on the same computer as

the NT/MPRI, please note the following instructions about the configu-

ration for incoming calls:

The NT/MPRI uses the ISDN service “data”. If other CAPI applications

besides the NT/MPRI are installed on the router computer or on the

same S

bus, each such application must be assigned a distinct MSN

or DDI for incoming calls. This is the only way to unambiguously direct

calls with the “data” service indicator, used not only by the NT/MPRI

but also by such programs as FRITZ!data. If n0 distinct numbers are as-

signed, a program like FRITZ!data may attempt to answer an incoming

call actually intended for the NT/MPRI.

If all other terminal equipment on the same S

bus uses other ISDN

services, such as “voice” in the case of an ISDN telephone, it is not

necessary to assign MSNs or DDIs, as the service indicator is sufficient

to identify the calls intended for the NT/MPRI.

ntmpri-e.book Seite 87 Donnerstag, 28. Februar 2002 11:26 11