Operation Manual

Cost/Connection Analysis
NT/MPRI – 5 Connection Management and Monitoring 78
l
Direction of the call (incoming, outgoing) and the cost assignment
setting (call destination or LAN)
l CAPI number of the controller through which the connection was
established
l Connection charges for the NT/MPRI and calculation method:
– “AOCD” if charge information is transmitted on your ISDN line
or PBX during connections
– “Charge Profile” if a charge profile for the inactivity timeout or
for charge estimation (“ISDN Settings”) has been selected in
the call destination settings. The NT/MPRI then estimates the
charges based on the selected charge profile
l Duration of the physical connections
An excerpt from the NT/MPRI event log is displayed in the lower frame
so that events can be monitored as they occur.
Cost/Connection Analysis
The following options are available with the “Cost/Connection Analy-
sis” menu command:
l Daily Report of detailed connection information:
The daily report contains exact details on all connections set up
by the NT/MPRI on the given day. The report includes the call des-
tination, number, charges (including the AOCD or charge profile
calculation method), data volume and connection duration, as
well as the number of outgoing and incoming calls.
The cost/connection information is summarized by Call Destina-
tion.
Active logical ISDN connections are not included. These can be
monitored in the “Connection Management” window.
l Selection of a connection and reporting period:
This command allows you to specify which cost/connection infor-
mation should be displayed. Information can be requested by Call
Destination or Number, and queries may be restricted to any giv-
en time period. The “Break down” option determines whether the
cost/connection information for each call destination is summa-
rized by day, week or month. The same details are displayed as in
the daily report.
ntmpri-e.book Seite 78 Donnerstag, 28. Februar 2002 11:26 11