Operation Manual

Connection Management and Monitoring
75 NT/MPRI – 5 Connection Management and Monitoring
5 Connection Management and
Monitoring
For administrators it is especially important to be able to supervise the
NT/MPRI in operation. A great number of functions are available for
this purpose. Moreover, the NT/MPRI’s HTTP management interface al-
lows these functions to be accessed from any PC in the network.
5.1 Connection Management: Setting up and
Clearing Down ISDN and ADSL Connections
The “Connection Management” page lists the current ISDN and ADSL
connections of the NT/MPRI along with their status. Various commands
can be carried out here, depending on the connection status.
Connections to all call destinations with the status “Enabled” are in-
cluded in the list.
In addition to the call destination’s name, number, current connection
status and possible actions, this page also displays various configura-
tion and statistical information about the connection.
The following status icons are used:
Icon Status
No entry exists for this call destination in the NT/MPRI routing
table, i.e., there is no known route to this call destination. The
NT/MPRI can not dial up a connection to this destination auto-
matically, but a connection can be set up manually.
The routing table includes an entry for this call destination,
i.e., the route to this call destination is known. The NT/MPRI
will dial up the connection automatically whenever data trans-
mission is desired.
A logical connection exists to this call destination. The physi-
cal connection was cleared by the NT/MPRI due to an inactivity
timeout.
ntmpri-e.book Seite 75 Donnerstag, 28. Februar 2002 11:26 11