Operation Manual

Access with a Static IP Address
43 NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics
Connection to the Internet via access with a static IP address
Before configuring the Internet access, the following information is re-
quired from your Internet provider:
l IP information like the domain name, domain name server and
any E-mail server used
l Internet-compliant IP address range
l telephone number of the PoP
l data for authentication (name, password)
Your Internet provider requires the following information from you:
l the telephone number of your NT/MPRI
Step 1:
Before installing the NT/MPRI, assign the first address from the IP ad-
dress range to the computer on which the NT/MPRI is to be installed.
The other workstations in the network each receive an IP address from
the assigned IP address range.
Install the NT/MPRI.
Step 2:
Select the menu command “Configuration / Call Destination / New Call
Destination / Internet”. An input mask with the parameters required for
dial-in Internet connections is opened.
IP Add.:194.75.39.3
Standard
Gateway:194.75.39.1
IP Add.:194.75.39.1
NT/MPRI
IP Add.:194.75.39.2
Standard Gateway:194.75.39.1
WS
WS
WS=Workstation
ISDN
Internet
PoP
ntmpri-e.book Seite 43 Donnerstag, 28. Februar 2002 11:26 11