Operation Manual

Access with a Static IP Address
NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics 42
7. Next, select the menu command “Special / Restart Service” and
click the “Restart Services” button.
Step 2:
Select the menu command “Connection Management”. In the new call
destination “Internet UUNet”, click the “IP” button in the “Action” col-
umn.
The connection to the Internet provider is established. Use the browser
to visit any Internet sites of interest. Click the “IP” button again to clear
the connection.
Step 3:
Configure DNS resolution at all workstations in the network by entering
the DNS server of UUNet. Alternatively, enter the IP address of the
proxy servers of UUNet in the web browser.
Step 4:
Send a ping from a workstation in the network to the domain name
server of UUNet:
ping <DNS Server of UUNet> -w 5000
If you receive a reply, the connection has been configured correctly.
Access with a Static IP Address
For access with a fixed IP address, generally a fixed IP address range is
assigned for your LAN. From this pool of IP addresses, each computer
in the network and the NT/MPRI receive a static address.
ntmpri-e.book Seite 42 Donnerstag, 28. Februar 2002 11:26 11