Operation Manual

Access with a Dynamic IP Address
41 NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics
Access via UUNet and ISDN
Connecting to the Internet via access with a dynamic IP address
The following information is required from UUNet:
l telephone number of UUNet
l your user name (PAP/CHAP)
l your password
Step 1:
1. To configure a new call destination as an Internet dial-in connec-
tion, select the menu command “Configuration / Call Destinations
/ New Call Destination / Internet”.
An input mask with the parameters required for Internet dial-in
connections is opened.
2. In the “Destination Name” field, enter “Internet UUNet” as the
name of the new call destination. The NT/MPRI call destination is
managed using this name.
3. In the “ISDN Number” field, enter the number of UUNet.
4. In the line “Authentication at Remote Site”, enter the user name
and password received from UUNet in the fields “Name” and
“Password”.
5. At “Inactivity Timeout”, activate the selection “Disconnect after”
and enter the value 60 seconds.
6. Save the call destination.
IP Add.:192.168.1.2
Standard
Gateway:192.168.1.3
IP Add.:192.168.1.3
NT/MPRI
IP Add.:192.168.1.1
Standard Gateway:192.168.1.3
WS
WS
WS=Workstation
ISDN
Internet
PoP UUNet
IP Address:194.1.1.2
ntmpri-e.book Seite 41 Donnerstag, 28. Februar 2002 11:26 11