Operation Manual

Example 2 Large Network with Multiple Segments

37 NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics

No additional settings are required in the NT/MPRI in Amsterdam.

Step 4:

Test now whether ping can be transmitted from a workstation in the

Frankfurt network to a workstation in the Amsterdam network. If you re-

ceive a reply, the network link has been configured correctly.

Example 2

Large Network with Multiple Segments

Large network with multiple segments

For this configuration it is important that the router in the LAN is in-

formed about the networks available over ISDN. If RIP is used in the

LAN, the router dynamically learns the routes available from the

NT/MPRI. Otherwise static routes must be defined.

Similarly, the NT/MPRI must be informed about the network situated

behind the other router in the LAN. Here, too, if RIP is not used, the

route must be configured statically.

IP Add.:192.168.1.1

Standard Gateway:192.168.1.4

IP Add.:192.168.1.3

Standard Gateway:192.168.1.4

NT/MPRI

WS=Workstation

ISDN

Berlin

IP Add.:192.168.1.2

Standard Gateway:192.168.1.4

NT/MPRI

IP Add.:192.168.10.3

IP Add.:192.168.10.2

Standard Gateway:192.168.10.3

IP Add.:192.168.10.1

Standard Gateway:192.168.10.3

Amsterdam

IP Add.:192.168.2.3

Standard Gateway:192.168.2.5

IP Add.:192.168.2.2

Standard Gateway:192.168.2.5

IP Add.:192.168.2.4

Standard

Gateway:192.168.2.5

Router

IP Add.:192.168.1.4

IP Add.:192.168.2.5

ntmpri-e.book Seite 37 Donnerstag, 28. Februar 2002 11:26 11