Operation Manual

Example 1 A Small Network Link via ISDN
NT/MPRI – 3 Configuration and Operation of the NT/MPRI: The Basics 36
Input mask for an IP dial-in connection with example files
8. Select the menu command “Special Settings / Restart Service”
and click the “Restart Service” button.
9. Select the menu command “Connection Management”.
In the list “Management of All Connections”, the newly configured
call destination appears with the designation “Amsterdam”.
10. Click the “IP Ping” button in the “Action” column.
A connection to the Amsterdam LAN is established briefly and
then cleared.
Step 2:
On all workstations in the network, enter the IP address of the NT/MPRI
computer, “192.168.1.3”, as the standard gateway. This ensures that all
packets whose call destination address lies outside the local network
are sent to the NT/MPRI.
Step 3:
Define a call destination “Frankfurt” on the Amsterdam NT/MPRI and
enter the following for “Static Route”: Network address “192.168.1.0”,
Mask “24”. Here, too, the standard gateway, i.e., the IP address of the
NT/MPRI computer in the local network, must be configured on all
workstations.
ntmpri-e.book Seite 36 Donnerstag, 28. Februar 2002 11:26 11