Operation Manual

Uninstallation
NT/MPRI – 2 Installation and First Steps 30
– Number: If you are calling from outside Germany, the number
must be changed accordingly.
– Charge profile for estimating charges: Set the charge profile to
correspond to your line charges.
The monthly budget for this connection is preset to 5 DM (2.5
EURO) to prevent high connection charges for this test connec-
tion.
4. Start the NT/MPRI by selecting “Restart Service”.
5. Open the “Connection Management” page and set up the desired
test connection to the ADC.
6. Return to the NT/MPRI Start page and click “AVM Home Page via
ADC” or check the connection by entering at the prompt ping
192.168.113.8.
General instructions for configuration are presented in the next chap-
ter, “Configuration and Operation of the NT/MPRI: The Basics” from
page 31. Detailed information about the parameters is available in the
Online Help, accessible directly from the HTML interface.
This test connection confirms that the NT/MPRI is correctly configured
for ISDN.
2.6 Uninstallation
Proceed as follows to remove the NT/MPRI:
Windows XP/2000
1. In “Start / (Settings) / Control Panel”, click the “Add/Remove Pro-
grams” icon.
2. In the left-hand side of the window, click “Change or Remove Pro-
grams” and then select the entry “AVM NT/MPRI” in the right-
hand section.
3. Click the “Change/Remove” button.
No confirmation dialog appears!
The NT/MPRI now will be removed.
4. Restart Windows XP/2000.
ntmpri-e.book Seite 30 Donnerstag, 28. Februar 2002 11:26 11