Operation Manual

Joint Installation of AVM Network Services
29 NT/MPRI – 2 Installation and First Steps
Joint Installation of AVM Network Services
If multiple products from the AVM Network Services series are installed
on your system, for instance, the NT/MPRI and the ISDN Access Server,
the joint start page of both products can be used. Access this page at
the following URL:
http://<Name> or <IP address>:4000
For a joint installation of the NT/MPRI and the ISDN Access Server, two
different program icons are generated in the Windows XP/2000/NT
Start menu, but the programs have the same interface. A number of the
menus are valid for both products, including “Server Status”, “Settings
for the ISDN-Controllers” and “Charge Profiles”. Other menus are valid
for only one of these products, like “User” for the ISDN Access Server
and “Call Destinations” for the NT/MPRI.
Changes made in a menu shared by both products thus are implement-
ed for both the NT/MPRI and the ISDN Access Server.
If both program windows are opened at the same time, closing one
window closes the other as well.
2.5 Test Connection with the AVM Data Call Cen-
ter
Once the NT/MPRI has been installed and the Windows XP/2000/NT
computer has been restarted, follow the instructions below to estab-
lish a test connection to a master router at the AVM Data Call Center
(ADC):
1. Start the NT/MPRI Manager.
2. Check the settings for your ISDN-Controller(s) at “Configuration /
Server Settings / ISDN-Controllers”.
By default, the first ISDN-Controller is registered as “Used”. If ad-
ditional ISDN-Controllers are installed in your computer, add them
here. It may be necessary to define additional settings for the
ISDN-Controllers, if you work at a PBX, for instance. See the On-
line Help for more instructions.
3. Check the pre-configured destination “ADC-IP” at “Configuration /
Call Destinations / Configured Call Destinations / ADC-IP”.
The following settings may require modification:
ntmpri-e.book Seite 29 Donnerstag, 28. Februar 2002 11:26 11