Operation Manual

Installing the NT/MPRI
NT/MPRI – 2 Installation and First Steps 24
Windows NT
1. In “Start / Settings / Control Panel / Network”, go to the “Proto-
cols” settings page and select the “TCP/IP Protocol” and click the
“Properties” button.
2. On the “DNS” settings page, add the IP address of the DNS server
of the new network adapter to the “DNS Service Search Order”
list.
Once these preparations are complete, the NT/MPRI may be installed.
2.3 Installing the NT/MPRI
The following components are installed on your computer during in-
stallation:
l AVM MultiProtocol Router for ISDN/DSL
l AVM WebServer (for HTTP communication between the NT/MPRI
and the browser)
Proceed as follows to install the NT/MPRI:
1. Insert the NT/MPRI CD in your CD-ROM drive.
2. A CD introduction appears automatically. Start the installation
program and then follow the instructions on the screen.
The welcome screen of the installation program appears.
3. Click “Next” to continue with installation.
4. Enter the CD key. This code is located on the CD cover.
Confirm your entries by clicking “OK”.
5. Confirm that the NT/MPRI is to be installed by clicking “OK”.
6. The next step is to enter the folder in which the NT/MPRI is to be
installed.
If the AVM ISDN Access Server is already installed on the comput-
er, the NT/MPRI files will be copied to the same folder.
Otherwise the path C:\PROGRAM FILES\AVM\ISDN MULTIPROTO-
COL ROUTER is suggested by default. Any other path desired may
be specified. Confirm the path for installation by clicking “Next”.
The program files for the NT/MPRI will be installed now.
ntmpri-e.book Seite 24 Donnerstag, 28. Februar 2002 11:26 11