Operation Manual

Settings for the ISDN-Controllers and ADSL-Controllers
23 NT/MPRI – 2 Installation and First Steps
The driver software for the AVM ISDN-Controller(s) must be loaded au-
tomatically when Windows XP/2000/NT is started! For more informa-
tion see the controller manual or the corresponding Readme.
Once the ISDN-Controller(s) have been installed, use the program
Connect32, included in every AVM ISDN-Controller package, to estab-
lish a test connection to the AVM Data Call Center (ADC) and check that
your ISDN line and the controller(s) function properly.
ADSL-Controllers
An additional network adapter is recommended to connect the com-
puter to an ADSL modem. The ADSL modem then will be connected to
this free network adapter. It is not necessary to bind TCP/IP to this new
network adapter, as PPPoE packets are exchanged with the ADSL mo-
dem rather than IP packets.
Next the DNS server of the new network adapter must be registered in
the network settings:
Windows XP
1. In “Start / Network Connections”, click the LAN connection with
the right mouse button and select “Properties” from the context
menu.
2. On the “General” settings page, select from the “This connection
uses the following items” list the entry “Internet Protocol
(TCP/IP)” and click the “Properties” button.
3. Select “Use the following DNS server addresses” and enter the IP
address of the DNS server of the new network adapter in the “Pre-
ferred DNS server:” field.
Windows 2000
1. In “Start / Settings / Network and Dial-Up Connections”, click the
LAN connection with the right mouse button and select “Proper-
ties” from the context menu.
2. On the “General” settings page, select from the “Components
checked are used by this connection” list the entry “Internet Pro-
tocol (TCP/IP)” and click the “Properties” button.
3. Select “Use the following DNS server addresses” and enter the IP
address of the DNS server of the new network adapter in the “Pre-
ferred DNS server:” field.
ntmpri-e.book Seite 23 Donnerstag, 28. Februar 2002 11:26 11