Operation Manual

Settings for the ISDN-Controllers and ADSL-Controllers
NT/MPRI – 2 Installation and First Steps 22
IP address assignments before installing the NT/MPRI: large network
IPX Settings
If you use IPX in the LAN, the computer on which the NT/MPRI is to be
installed requires an unambiguous internal IPX network number. It is
also possible to register this internal network number in the NT/MPRI
Manager after installation. The NT/MPRI accepts the frame type set-
tings “Auto Frame Type Detection” and “Manual Frame Type Detec-
tion”.
Settings for the ISDN-Controllers and ADSL-Controllers
ISDN-Controllers
Once the ISDN-Controller has been installed in your computer, it will be
recognized by Windows XP/2000 automatically as a Plug & Play de-
vice. Follow the instructions on the screen.
In Windows NT, install the driver software for your ISDN-Controller(s)
from the “Server-Edition” CD included in the package.
The ISDN-Controllers are managed in the NT/MPRI using the controller
number assigned during installation of the driver software (CAPI). If
multiple ISDN-Controllers are to be used, make a note of the number
assigned to each ISDN-Controller during installation.
IP Address: 192.168.1.1
Standard Gateway: 192.168.1.4
IP Address: 192.168.1.3
Standard Gateway: 192.168.1.4
IP Address: 192.168.1.2
Standard Gateway: 192.168.1.4
Workstation
Standard Gateway: 192.168.2.1
IP Address: 192.168.2.2
Standard Gateway: 192.168.2.1
IP Address: 192.168.2.3
Standard Gateway: 192.168.2.1
Router
or
Server
Windows
XP/2000/NT
Workstation
Workstation
Workstation
Workstation
IP Address: 192.168.1.4
IP Address: 192.168.2.1
IP Address: 192.168.2.4
ntmpri-e.book Seite 22 Donnerstag, 28. Februar 2002 11:26 11