Operation Manual

Installation Together with Other CAPI 2.0 Applications
17 NT/MPRI – 1 Introduction
Installation Together with Other CAPI 2.0 Applications
Meaningful and cost-effective use of multiple ISDN-Controllers is en-
sured by combining the installed ISDN-Controllers with the two AVM
products: ISDN Access Server and NDI. Certain B channels can be re-
served for the AVM Network Services products to guarantee smooth as-
signment of the ISDN lines when these products are used simulta-
neously.
The ISDN-Controllers can be used by other CAPI 2.0 applications as
well, such as fax transmission. If other CAPI 2.0 applications which use
the same ISDN service as the NT/MPRI (such as file transfer software in
server mode) are installed on the same computer, it must be ensured
that all applications are addressed unambiguously for incoming calls
to be assigned correctly. The CAPI 2.0 standard furnishes with multiple
subscriber numbers (MSNs) at the basic access and suffixes (DDI) at
the primary rate access to allow unambiguous assignment in such
cases.
1.3 Package Contents
The following contents are included in the AVM MultiProtocol Router for
ISDN/DSL package:
l “AVM MultiProtocol Router for ISDN/DSL” CD including a CD key
l “Server Edition” CD with drivers for the AVM ISDN-Controller B1,
C4 and T1 or T1-B for Windows XP/Windows 2000/NT
l AVM MultiProtocol Router for ISDN/DSL manual
Two variants of the product are available: the BRI version (1-8 B chan-
nels), and the PRI version (1-120 B channels).
If any of these contents are missing, please contact your vendor.
ntmpri-e.book Seite 17 Donnerstag, 28. Februar 2002 11:26 11