Operation Manual

NT/MPRI Messages
NT/MPRI – 7 Messages 106
Packet <description> denied due to rule <no.> from <profile name>.
An IP firewall message indicating that the packet described was dis-
carded. The filter profile is indicated along with the position of the ap-
plicable rule within the filter.
Packet <description> rejected due to rule <no.> from <profile name>.
An IP firewall message indicating that the packet described was re-
fused. The filter profile is indicated along with the position of the appli-
cable rule within the filter.
Physical connection cleared after inactivity.
The physical ISDN connection was cleared due to inactivity.
Physical connection cleared after inactivity (charge profile).
The physical ISDN connection was cleared due to inactivity. The value
for the inactivity timeout was determined using the specified charge
profile.
<Protocol> connection is cleared.
The logical network connection to the call destination named has been
cleared down.
<Protocol> connection is set up.
The logical network connection to the call destination named has been
established.
Remote site <call destination> lost logical connection.
The remote site lost the logical connection to the local site.
Remote site does not support security call-back.
This message indicates that the remote site dialed does not support
the security call-back requested by the local NT/MPRI.
Self-configuring inactivity timeout for connection to <call destination>
set to <xx> seconds.
The inactivity timeout for the ISDN connection was set to the given val-
ue.
ntmpri-e.book Seite 106 Donnerstag, 28. Februar 2002 11:26 11