Operation Manual

Installing the Driver Software
Controller C4 – 5 Driver Software Installation in Novell NetWare 21
5.2 Installing the Driver Software
The only difference between the installation procedures for
the stand-alone CAPI and the version for CAPI Manager is
the path that must be entered to locate the installation files.
To install the driver software, perform the following steps:
1. Insert the installation CD in the CD-ROM drive.
2. Enter the following command at the system console:
nwconfig
Confirm by pressing “Enter”. This loads the Novell
NetWare server's configuration program. The program's
“Configuration Options” menu appears.
3. Select “Product Options” in the menu and press
“Enter”.
4. A menu appears with the name “Other Installation
Actions”. Select “Install a product not listed” and press
“Enter”.
5. An input box appears in which the directory path to the
installation files may be entered. The default path
shown is the floppy disk drive, A:\. To specify a different
path, press “F3”.
6. To install the stand-alone CAPI driver, enter the path as
follows:
<CD name>:\cardware\c4\netware\capi20
To install the driver version for Novell CAPI Manager,
enter the path:
<CD name>:\cardware\c4\netware\4capimgr
7. In the next menu, choose the option “Install on this
server” and press “Enter”.
The driver files for the AVM ISDN-Controller C4 are co-
pied to the SYS:SYSTEM directory.
8. At the end of the installation process, the file
C4 README is displayed with the latest information
about the AVM ISDN-Controller C4.