Operation Manual

Installing the Driver Software

Controller C4 – 4 Driver Software Installation in Windows NT 17

4. The installation program’s sign-on message appears.

This window contains a button to display the Readme

file containing the latest information about the AVM

ISDN-Controller C4 and the installation procedure. To

proceed with the installation, click “Continue”.

To display a Help text on any step in the installation

program, press the “F1” key.

5. In the next window, select “New” in the area labelled

"To add a Controller". Click “Continue”.

6. Enter the name of the folder in which the driver soft-

ware is to be installed. Confirm your entry by clicking

“Continue”.

7. In the next dialog, select an S

interface to configure, or

choose to configure all four interfaces at once. Click

“Continue”.

8. In the subsequent dialogs, set the ISDN line type and

the D-channel protocol for the selected S

interface(s).

9. When you have finished, the Setup program summariz-

es the settings for all four S

interfaces: if you made any

changes to the settings of an interface, they are shown

here along with the default settings for the other three.

10. To change the settings for the other S

interfaces, click

the button “Configure other S

interfaces”. You are then

prompted once more to choose which interface you

want to configure. Repeat steps 7 through 9 until the

settings for all four S

interfaces correspond to the ISDN

lines you will use.

11. When the configuration is complete, click “Continue”.

The setup program now copies the driver files to the

specified folder.

12. Finally, a message box displays the current configura-

tion of the ISDN-Controller C4 and its four S

interfaces.

Click “Continue” to acknowledge and close the window.

This completes the driver software installation for Windows

NT 4.0. The ISDN-Controller C4 is now ready to use.