Operation Manual

Package Contents
ISDN-Controller C2 – 1 Introduction 9
operating system: Windows XP, Windows 2000, Win-
dows NT 4.0, Linux or Novell NetWare 4.11 or higher
one or two basic-rate (S
0
) ISDN lines
1.4 Package Contents
The AVM ISDN-Controller C2 package contains:
AVM ISDN-Controller C2 (plug-in card for the PCI bus)
two S
0
cables with RJ45 connectors, 6 m
AVM ISDN-Controller C2 manual
1 compact disk (CD-ROM) with all installation programs
and the AVM ISDN-Tools
The CD contains:
driver software for Windows XP, Windows 2000, Win-
dows NT 4.0, Novell NetWare 4.11 or higher and Linux
Configuration and diagnostic software (C2Setup,
C2Test, Connect32)
AVM system drivers
– AVM ISDN CAPI Port Driver
– AVM NDIS WAN CAPI Driver
– AVM ISDN TAPI Services for CAPI
AVM ISDN-Tools
The AVM ISDN-Tools are a collection of ISDN applica-
tions based on CAPI 2.0. They include such programs as
“Connect 32” for convenient ISDN data transfer. See the
ISDN-Tools manual on the CD for installation and oper-
ating instructions.
AVM ISDN-Tools manual in PDF format
Other CAPI-based applications, such as the AVM ISDN Ac-
cess Server or third-party products, are available from your
vendor.
c2-e.book Seite 9 Mittwoch, 27. November 2002 3:24 15