Operation Manual

System Requirements
8 ISDN-Controller C2 – 1 Introduction
CAPI (COMMON-ISDN-API)
The driver software for the ISDN-Controller C2 provides the
industry standard CAPI applications interface on your com-
puter. This interface specified by the international standard-
ization organization ETSI guarantees the universal exchange-
ability of ISDN applications for the use of fax and speech
transmission. This interface allows the ISDN-Controller C2 to
be used with a wide range of CAPI 2.0-based ISDN applica-
tions.
For more information about CAPI 2.0, see the section “The
Applications Interface CAPI 2.0” on page 42.
Supported Protocols
The ISDN-Controller C2’s driver software supports the inter-
national D-channel protocol DSS1 (Euro-ISDN).
The driver for the D-channel protocol is included in the soft-
ware package. It is also available from the AVM Data Call
Center or over the Internet (see the section “Information and
Updates” on page 57). The driver software supports a wide
range of B-channel protocols, including the data protocols
X.75, X.25, HDLC transparent, V.110 and V.120.
Supported Operating Systems
Driver software for the AVM ISDN-Controller C2 is available
for the following operating systems: Windows XP, Windows
2000, Windows NT 4.0, Novell NetWare 4.11 or higher and
Linux.
1.3 System Requirements
The following hardware and software requirements must be
met in order to use the AVM ISDN-Controller C2:
a computer with a Pentium or Pentium-compatible pro-
cessor (CPU)
an available PCI slot that conforms to the specification
PCI 2.1 or higher
c2-e.book Seite 8 Mittwoch, 27. November 2002 3:24 15