Operation Manual
Table Of Contents
- Title
- Legal Notes
- Contents
- Typographical Conventions
- 1 Introduction
- 2 Hardware Installation
- 3 Installing the Driver Software in Windows XP
- 4 Installing the Driver Software in Windows 2000
- 5 Installing the Driver Software in Windows NT 4.0
- 6 Installing the Driver Software in Novell NetWare
- 7 Installation in Linux
- 8 AVM System Architecture
- 9 Technical Summary
- 10 Troubleshooting
- 11 Technical Support from AVM
- Index
- Declaration of CE Conformity
The Driver Software for the AVM ISDN-Controller C2
ISDN-Controller C2 – 1 Introduction 7
The following illustration shows a schematic illustration of
ISDN-Controller C2 showing the numbering of the S
0
lines.
Numbering of the AVM ISDN-Controller C2’s S
0
lines
1.2 The Driver Software for the AVM
ISDN-Controller C2
The ISDN-Controller’s driver software controls the communi-
cation processes and the data transfer.
The driver software is loaded to the ISDN-Controller from the
PC's hard disk. This procedure ensures that the driver soft-
ware can be updated quickly and easily at any time, so that
new features can be added or adapted without manipulating
the ISDN-Controller C2 hardware.
The driver software can compress data according to the V.42
standard. For more information on automatic data compres-
sion, see the section “CAPI SoftCompression X75/V42bis”
on page 47.
Furthermore, the driver software also supports analog servic-
es such as Group 3 fax and modem communication. For de-
tails, see the sections “CAPI SoftFax” on page 47 and “CAPI
SoftModem” on page 48.
c2-e.book Seite 7 Mittwoch, 27. November 2002 3:24 15