Operation Manual

Introduction
6 ISDN-Controller C2 – 1 Introduction
1Introduction
The AVM ISDN-Controller C2 is the ideal solution for all those
who need more than one ISDN BRI line. Equipped with a
high-performance CPU and on-board memory, the ISDN-Con-
troller C2 can be used for all kinds of communication tasks.
All commonly used digital communication protocols are pro-
vided. Analog connections with modems and fax machines
are also supported. Incoming or outgoing telefax connec-
tions can be processed over all four channels simultaneous-
ly.
Up to four active AVM ISDN-Controllers can be used in one
PC, so that you can meet your company’s growing communi-
cation needs by adding more ISDN-Controllers. This means
long-term security for your investments in ISDN hardware.
Mixed configurations with other active AVM ISDN-Controllers
for the PCI or ISA bus in the same computer are also support-
ed.
1.1 The AVM ISDN-Controller C2
The ISDN-Controller C2 is an active ISDN-Controller with its
own high-performance CPU and on-board memory. The archi-
tecture and technologies used are especially well suited to
the operating conditions found in server environments.
The driver software for the ISDN-Controller C2 supports all
important communication protocols. Smooth communica-
tion is thus ensured with systems in ISDN, GSM mobile and
analog telephone networks as well as other digital networks.
The AVM ISDN-Controller C2 allows you to connect a comput-
er to two basic-rate ISDN lines. You no longer need two bus
slots and twice the system resources to use four ISDN B
channels. The ISDN-Controller C2 requires only one slot and
the system resources for one card.
Each of the S
0
interfaces can be configured independently.
Please note the order of the S
0
lines during installation and
configuration.
c2-e.book Seite 6 Mittwoch, 27. November 2002 3:24 15