Operation Manual

Error Messages in Novell NetWare
56 ISDN-Controller C2 – 10 Troubleshooting
Error Messages: “Deinstallation error, wrong CAPI driver
loaded.”
“Installation error, wrong CAPI driver loaded.”
“Installation error, ISDN-Controller-xx unknown keyword
<xx>.”
„Installation error, ISDN-Controller-xx <xxxx> value too
long.“
“Installation error, ISDN-Controller-xx <xxxx> illegal value.”
Possible cause: You have replaced some files in the ISDN-
Controller driver installation directory (on obtaining updated
drivers from the AVM Data Call Center, for example). Older
files in the same directory cause version conflicts.
Remedy: Always perform the full AVM ISDN-Controller C2 in-
stallation procedure; never replace individual files.
Error message: “Installation error, Controller-xx with I/O
address <xxx> does not answer.”
Possible cause: The ISDN-Controller C2 was not fully loaded
or the hardware is damaged.
Remedy: Repeat the complete installation of the ISDN-
Controller C2. In case of a hardware defect, please contact
your dealer or AVM.
Error message: “... at least one application is registered.”
Possible cause: You attempted to unload or uninstall the
AVM ISDN-Controller C2 while an application such as a termi-
nal or fax program was still using it.
Remedy: First end all applications that use the AVM ISDN-
Controller C2. Then you can unload or uninstall the ISDN-
Controller.
c2-e.book Seite 56 Mittwoch, 27. November 2002 3:24 15