Operation Manual
Table Of Contents
- Title
- Legal Notes
- Contents
- Typographical Conventions
- 1 Introduction
- 2 Hardware Installation
- 3 Installing the Driver Software in Windows XP
- 4 Installing the Driver Software in Windows 2000
- 5 Installing the Driver Software in Windows NT 4.0
- 6 Installing the Driver Software in Novell NetWare
- 7 Installation in Linux
- 8 AVM System Architecture
- 9 Technical Summary
- 10 Troubleshooting
- 11 Technical Support from AVM
- Index
- Declaration of CE Conformity
Technical Specifications and Features
ISDN-Controller C2 – 9 Technical Summary 51
Digital protocols:
X.75, HDLC transparent, bit-transparent, X.25, ISO 8208
(X.25 DTE-DTE), X.31 Cases A and B, T.70, T.90, Mobile
ISDN (ISO 3309) including HSCSD, V.110, V.120, DTMF
recognition
Analog protocols:
Fax G3 (T.30, V.17, V.29, V.27ter), Fax G3 Annex A (Error
Correction Mode) and Group 3 fax Annex F (faxing with
two-dimensional data compression)
Modem emulation: V.21, V.22, V.2 2bis, V.32, V.3 2bis
Support for point-to-point and leased lines
Supplementary Services, including Hold & Retrieve,
Suspend & Resume (TP), 3PTY, ECT,...
All protocol software loadable on the ISDN-Controller
AVM ISDN CAPI Port Driver Installation
AVM NDIS WAN Driver for Windows XP, Windows 2000
and Windows NT 4.0
AVM ISDN TAPI Services for CAPI for Windows XP, Win-
dows 2000 and Windows NT 4.0
Designed for use with the operation systems Windows
XP, Windows 2000, Windows NT 4.0, Novell NetWare
4.11 or higher and Linux
Up to four ISDN-Controller C2s installable in one com-
puter, or combined operation with other active AVM
ISDN-Controllers
International certification
c2-e.book Seite 51 Mittwoch, 27. November 2002 3:24 15