Operation Manual

Technical Specifications and Features
50 ISDN-Controller C2 – 9 Technical Summary
Your CAPI application, such as a fax server, also must
support operation on point-to-point lines.
The CAPI application also must be configured to inter-
pret the DDI (Direct Dial-In) ISDN numbers correctly.
Consult your application software documentation for
more information.
9.3 Technical Specifications and Features
ISDN-Controller for ISDN BRI lines and the PCI bus
One or two BRI lines
Active ISDN-Controller with its own CPU and on-board
RAM
High-performance StrongARM SA-110 processor with
270 MIPS at 233 MHz
16 MB of SDRAM
State-of-the-art technologies, including BGA devices,
SDRAM, 3.3 V supply voltage, etc.
Low power consumption: approx. 3 W
PCI Bus Mastering DMA: minimum system load and
maximum throughput
Suitable for all ISDN services:
Internet access, internetworking, remote access, file
transfer, fax, voice, video, digital data communication
with other networks
COMMON-ISDN-API 2.0 applications interface
CAPI SoftCompression V.42bis and channel bundling in
accordance with the CAPI specification
CAPI SoftFax for fax communication at 2,400, 4,800,
9,600 and 14,400 bit/s
CAPI SoftModem for analog modem connections at
1200/75, 2,400, 4,800, 9,600 and 14,400 bit/s
c2-e.book Seite 50 Mittwoch, 27. November 2002 3:24 15