Operation Manual
Table Of Contents
- Title
- Legal Notes
- Contents
- Typographical Conventions
- 1 Introduction
- 2 Hardware Installation
- 3 Installing the Driver Software in Windows XP
- 4 Installing the Driver Software in Windows 2000
- 5 Installing the Driver Software in Windows NT 4.0
- 6 Installing the Driver Software in Novell NetWare
- 7 Installation in Linux
- 8 AVM System Architecture
- 9 Technical Summary
- 10 Troubleshooting
- 11 Technical Support from AVM
- Index
- Declaration of CE Conformity
Updating the Driver Software
ISDN-Controller C2 – 7 Installation in Linux 41
7.5 Updating the Driver Software
The latest driver software is available at the ADC and from
the AVM Internet pages. See the associated information
files.
Remove the existing driver software from your computer be-
fore installing a newer version of the CAPI 2.0 driver!
Proceed as follows:
1. Exit all CAPI applications.
2. Open a console and enter the following command:
capiinit stop
3. Remove the entry for the AVM ISDN-Controller in the
“/etc/capi.conf” file.
4. Restart your computer.
5. Start the installation of the new driver software as de-
scribed in section “Installing CAPI4Linux in SuSE Linux”
from page 37.
This completes the update operation for the driver software.
c2-e.book Seite 41 Mittwoch, 27. November 2002 3:24 15