Operation Manual

Removing All ISDN-Controllers and Their Driver Software
ISDN-Controller C2 – 6 Installing the Driver Software in Novell NetWare 33
9. Stand-Alone CAPI only: Repeat the previous step as of-
ten as necessary to remove all ISDN-Controller C2s from
the “Configured Boards” list.
10. Stand-Alone CAPI only: Press “Esc” to close the board
overview and save your entries when prompted by click-
ing “Yes”.
11. Enter the following command at the system console and
confirm by pressing “Return”:
nwconfig
The “Configuration Options” menu appears.
12. Select the “Product Options” item from the menu and
press “Return”.
The “Other Installation Actions” menu appears.
13. Select here the entry “View/Configure/Remove in-
stalled products” and press “Return”. A list of the pro-
grams already installed is displayed.
14. Move the highlight to the “AVM ISDN-Controller C2” en-
try and press “Del”. Confirm with “Yes”.
15. Press “Esc” as often as necessary to close all sub-
menus and return to the “Configuration Options” menu.
This completes the uninstallation of all ISDN-Controller C2s
and their driver software.
c2-e.book Seite 33 Mittwoch, 27. November 2002 3:24 15