Operation Manual

Unloading the Driver Software
ISDN-Controller C2 – 6 Installing the Driver Software in Novell NetWare 27
Manual Loading
Enter the following command at the NetWare system con-
sole:
load capi20
Press “Return”. A message appears reporting that the ISDN-
Controller C2 has been loaded and the CAPI interface is
available.
Unloading the Driver Software
To unload the driver software, enter the following command
at the NetWare system console and press “Return”:
load capi20 -d
Configuring and Starting ISDN-Controller C2
Operation with the Novell CAPI Manager
To configure the AVM ISDN-Controller C2, proceed as follows:
1. Enter the following command at the system console:
load inetcfg
The “Internetworking Configuration” window appears.
2. Select the item “Boards” in this menu and press “En-
ter”.
The “Configured Boards” list appears. This list contains
all of the network adapters that have already been con-
figured, including the ISDN-Controller.
3. Press the “Ins” key.
4. In the “Select A Driver” dialog, select the “WHSMCAPI”
entry and press “Return”.
5. In the “Board Name” text field, enter a name for the
new ISDN-Controller C2 and press “Return”.
This is the name under which the ISDN-Controller will be
registered in the “Configured Boards” list after configu-
ration.
c2-e.book Seite 27 Mittwoch, 27. November 2002 3:24 15