Operation Manual

Installing the Driver Software
24 ISDN-Controller C2 – 6 Installing the Driver Software in Novell NetWare
6.2 Installing the Driver Software
The only difference between the installation procedures for
the Stand-Alone CAPI and the version for CAPI Manager is
the path that must be entered to locate the installation files.
In order to install the driver software, carry out the following
steps:
1. Insert the installation CD in your CD-ROM drive.
2. Enter the following command at the system console and
confirm by pressing “Return”:
nwconfig
3. This loads the Novell NetWare server's configuration
program. The “Configuration Options” menu of the con-
figuration program appears.
4. Select the “Product Options” item from the menu and
press “Return”.
The “Other Installation Actions” menu appears.
5. Select the “Install a product not listed” item from the
menu and press “Return”.
An input box appears in which the directory path to the
installation files may be entered. The disk drive A:\ is
suggested by default.
6. To specify the path to the CD-ROM, press “F3”.
7. For the Stand-Alone CAPI driver installation, enter the
path as follows:
<CD-ROM name>:\cardware\c2\netware\
capi20
To install the driver version for Novell CAPI Manager,
enter the path:
<CD-ROM name>:\cardware\c2\netware\
4capimgr
8. In the next step, select “Install on this server” and
press “Return”.
c2-e.book Seite 24 Mittwoch, 27. November 2002 3:24 15