Operation Manual
Table Of Contents
- Title
- Legal Notes
- Contents
- Typographical Conventions
- 1 Introduction
- 2 Hardware Installation
- 3 Installing the Driver Software in Windows XP
- 4 Installing the Driver Software in Windows 2000
- 5 Installing the Driver Software in Windows NT 4.0
- 6 Installing the Driver Software in Novell NetWare
- 7 Installation in Linux
- 8 AVM System Architecture
- 9 Technical Summary
- 10 Troubleshooting
- 11 Technical Support from AVM
- Index
- Declaration of CE Conformity
Removing the ISDN-Controller C2
22 ISDN-Controller C2 – 5 Installing the Driver Software in Windows NT 4.0
Proceed as follows to remove the ISDN-Controller C2 driver
software in Windows NT 4.0:
1. Open the Windows NT 4.0 “Control Panel” with “Start /
Settings”.
2. Double-click the “Add/Remove Software” icon.
3. The AVM ISDN-Controller C2 appears in the list of in-
stalled programs. Select this entry.
4. Click the “Add/Remove” button. The deinstallation pro-
gram is started.
5. First select the ISDN-Controller you want to remove and
click “Continue”.
6. The next window displays the folder which contains the
corresponding driver software. Confirm once again with
“Continue”.
7. To conclude the deinstallation you will be prompted to
restart Windows NT 4.0 so that the changes can take ef-
fect.
8. Now switch off the computer and unplug it, then re-
move the ISDN-Controller card.
This concludes the uninstallation of the AVM ISDN-
Controller C2 in Windows NT 4.0.
c2-e.book Seite 22 Mittwoch, 27. November 2002 3:24 15