Operation Manual

Installing the Driver Software
20 ISDN-Controller C2 – 5 Installing the Driver Software in Windows NT 4.0
4. The welcome window of the installation program ap-
pears. From this window you can view the AVM README
file for the AVM ISDN-Controller C2. Click “Continue”.
To display a help text on any step in the installation
program, press the “F1” key.
5. In the next window, select “New” in the area labelled
“To add a controller”. Click “Continue”.
6. Enter the name of the folder in which the driver soft-
ware is to be installed and click “Continue”.
7. In the next dialog, select an S
0
line to configure, or
choose to configure both lines at once. Click “Contin-
ue”.
8. In the subsequent dialogs, set the line type and the D-
channel protocol for the selected S
0
line(s).
9. The next window displays the settings for both S
0
lines:
any changes made to the configured line are shown
here along with the default settings for the other inter-
face.
10. To change the settings for the other S
0
lines, click the
button “Configure other S
0
interfaces”. You are then
prompted once more to choose which S
0
line you want
to configure. Go back to step 7 and follow the instruc-
tions until both S
0
lines have been configured as need-
ed.
11. When the configuration is complete, click “Continue”.
The installation program then copies all files to the
specified folder.
12. Finally, a message box displays the current configura-
tion of the ISDN-Controller C2 and its two S
0
lines. Click
”Continue“ to acknowledge and close the window.
This completes the driver software installation for Windows
NT 4.0. The ISDN-Controller C2 is now ready to use.
In the “Start / Programs” menu, you will find a new program
group named “AVM”. This group contains the entries “AVM
Internet Home Page” (link to AVM’s WWW server), “C2
Readme”, “C2 Setup” and “C2 Test”.
c2-e.book Seite 20 Mittwoch, 27. November 2002 3:24 15