Operation Manual

Installing the Driver Software in Windows XP
12 ISDN-Controller C2 – 3 Installing the Driver Software in Windows XP
3 Installing the Driver
Software in Windows XP
Changing of presentation of menus and folders is a feature
of Windows XP. The following instructions are based on a
standard Windows XP installation.
The AVM ISDN-Controller C2 is shipped with drivers that are
especially developed for use in Microsoft Windows XP. The
driver architecture conforms to the Microsoft Win 32 Driver
Model (WDM). This true 32-bit device driver offers full sup-
port for all features of Windows XP.
The CAPI 2.0 supplied with the controller supports Windows
applications and applications in DOS windows simulta-
neously. Information on CAPI can found in the section “The
Applications Interface CAPI 2.0” on page 42.
3.1 Installing the Driver Software
Once the AVM ISDN-Controller C2 has been inserted in your
computer, proceed as follows:
1. Switch on your computer.
2. The driver software for the AVM ISDN-Controller C2 is al-
ready contained in the Windows XP operating system
and is installed automatically when the computer is
started.
A status message task bar indicates that the AVM ISDN-
Controller C2 has been detected and installed. This message
disappears after a few seconds.
This concludes the installation of the ISDN-Controller C2 in
Windows XP. ISDN-Controller is now ready for immediate op-
eration.
c2-e.book Seite 12 Mittwoch, 27. November 2002 3:24 15