Operation Manual

Installing the Driver Software
64 ISDN-Controller B1 v3.0 – 10 Installation in Novell NetWare
1. Start your computer.
2. Insert the “AVM ISDN-Controller B1 v3.0” CD in your CD
drive.
3. Enter the following command:
load nwconfig
to load the installation menu of the Novell NetWare
server. The “Configuration Options” menu of the instal-
lation program appears.
4. Select “Product options” from this menu and press “Re-
turn”.
On a NetWare 3.x server, now a list of the programs al-
ready installed is displayed.
NetWare servers of version 5.x or 4.x show a menu la-
beled “Other Installation Items/Products”. Select the
item “Install a product not listed” from this menu and
press “Return”.
5. The disk drive A:\ is suggested by default. To specify
another path, press “F3”.
6. To install the driver software for the Stand-Alone Ver-
sion of the ISDN-Controller B1 v3.0, enter the following
command:
<CD-ROM DRIVE>:\CARDWARE\B1_C30\
NETWARE\CAPI20\ENGLISH
To install the driver software for the CAPI Manager, en-
ter the following command:
<CD-ROM DRIVE>:\CARDWARE\B1_V30\
NETWARE\4CAPIMGR\ENGLISH
7. Confirm by pressing “Return”.
8. In the next step, select “Install on this server” and
press “Return”.
The files for the AVM ISDN-Controller B1 v3.0 are now
copied to the SYS:SYSTEM directory.
HB_B1V30.book Seite 64 Mittwoch, 7. Februar 2001 3:19 15