Operation Manual

Installing Additional Controllers
ISDN-Controller B1 v3.0 – 7 Installation in Windows 95 47
7.7 Installing Additional Controllers
Up to four active AVM ISDN-Controllers may be installed in
your computer at the same time. It is also possible to com-
bine active AVM ISDN-Controllers for ISA and PCI buses in
one computer.
To install an additional AVM ISDN-Controller B1 v3.0, simply
repeat the entire installation procedure as described. Start
by installing a new hardware device. The installation pro-
gram automatically recognizes additional ISDN-Controller
and, assisted by the Device manager, integrates them into
the system.
To add a PCI or USB controller, perform the installation as de-
scribed in the corresponding manual.
The drivers of all installed ISDN-Controllers are loaded auto-
matically when Windows is started.
7.8 Removing the ISDN-Controller B1 v3.0
To remove the AVM ISDN-Controller B1 v3.0 from Windows
95, proceed as follows:
1. Open the Windows 95 Control Panel with “Start /
Settings”.
2. Double-click the “Add/Remove Software” icon.
3. The list of software installed includes an entry for the
“AVM ISDN-Controller B1 Family” (or the last AVM ISDN-
Controller installed). Select this entry and click the
“Add/Remove” button.
The uninstallation program is started.
4. The next window displays the folder which contains the
corresponding driver software to be deleted.
Confirm by clicking “Next”.
HB_B1V30.book Seite 47 Mittwoch, 7. Februar 2001 3:19 15