Operation Manual

Removing the ISDN-Controller B1 v3.0
ISDN-Controller B1 v3.0 – 6 Installation in Windows 98 41
6.8 Removing the ISDN-Controller B1 v3.0
To remove the AVM ISDN-Controller B1 v3.0 from Windows
98, proceed as follows:
1. Open the Windows 98 Control Panel with “Start /
Settings”.
2. Double-click the “Add/Remove Software” icon.
3. The list of software installed includes an entry for the
“AVM ISDN-Controller B1 Family” (or the last AVM ISDN-
Controller installed). Select this entry and click the
“Add/Remove” button.
The uninstallation program is started.
4. The next window displays the folder which contains the
corresponding driver software to be deleted.
Confirm by clicking “Next”.
5. At the conclusion of uninstallation you will be prompted
to restart Windows so that the changes can be imple-
mented.
Only one ISDN-Controller may be removed at a time. If mul-
tiple ISDN-Controllers are installed and all are to be re-
moved, perform the above procedure several times (without
restarting Windows between the individual uninstallation
procedures).
HB_B1V30.book Seite 41 Mittwoch, 7. Februar 2001 3:19 15