Operation Manual

Removing the ISDN-Controller B1 v3.0
ISDN-Controller B1 v3.0 – 3 Installation in Windows 2000 21
2. The Add/Remove New Hardware Wizard is started. Click
“Next”.
3. In the subsequent dialog, select the option “Unin-
stall/Unplug a device” and click “Next”.
4. Then select the first option, “Uninstall a device”. Con-
firm by clicking “Next”.
5. In the next dialog, the device to be installed must be se-
lected. Activate the option “Show hidden devices” and
click “Next”.
Select the entry “AVM ISDN-Controller B1”. Click “Next”.
6. Confirm the uninstallation by activating the option “Yes,
remove this device” and then clicking “Next”.
7. As a final step, click “Finish”.
The ISDN-Controller is removed from the system.
Only one ISDN-Controller can be removed at a time. If your
system has multiple ISDN-Controller installed and all are to
be removed, perform the described procedure several times
(without restarting Windows between the individual unin-
stallation tasks).
HB_B1V30.book Seite 21 Mittwoch, 7. Februar 2001 3:19 15