Operation Manual

20
2 Installation
• In the D channel protocol selection dialog, click on the
checkbox labeled ”Enable CAPI SoftCompression
X75/42bis”.
• Confirm your option by clicking on Continue, and in
the following dialog click on OK.
• Then restart your computer.
2.6 Removing the ISDN-Controller
To remove the AVM ISDN-Controller B1 USB from your
system, open the Control Panel (under Settings in the
Windows Start menu) and double-click on the Add/
Remove Programs icon. In the list of installed programs,
select the entry AVM ISDN-Controller B1 USB, then
click on the Add/Remove button. The ”Uninstall” pro-
gram starts. All files and entries are then deleted from
your computer. Restart your computer as prompted.
2.7 The AVM NDIS WAN CAPI Driver
To support the use of your ISDN-Controller B1 USB in
conjunction with Windows 95/98’s Dial-up Networking or
with Windows NT 5.0’s RAS, AVM provides the NDIS WAN
CAPI Driver, found on the floppy disk labeled ”AVM NDIS
WAN Driver” or on the CD-ROM in the folders
\Tools\NDISWAN.95,\Tools\NDISWAN.98 and \Tools\
NDISWAN.NT. The AVM CAPI Port Driver is also available
from the AVM Data Call Center or from AVM’s FTP server
on the Internet.
For detailed instructions on installing and using the NDIS
WAN CAPI Driver, please see the accompanying .doc and
.hlp files.