Operation Manual

17
2 Installation
• To finish the hardware component installation, the
computer must be restarted. Answer Yes at the
corresponding prompt.
If you installed the driver from a floppy disk, remove
it from the floppy drive now.
• After Windows has started again, the sign-on window
of the AVM ISDN-Controller B1 USB Setup pro-
gram appears automatically. Click on Continue.
• In the next dialog, select the option ”Installation” and
then click on Continue.
• Next, enter the folder in which you want the driver
software for the ISDN-Controller B1 USB installed
on your computer. The default is C:\IDRIVER. You may
confirm this or enter any other path.
When you have entered the path to the desired folder,
click on Continue.
• In the next dialog, select the D channel protocol used
on your ISDN line (DSS1 or 1TR6). Click on Continue
to confirm your choice.
• The Setup program now copies all the necessary files
to the specified folder.
Afterward, a message box shows the current
configuration of the ISDN-Controller B1 USB. Click
on OK.
To complete the driver software installation, you must
restart Windows. Answer the corresponding prompt.
After this restart, the installation of the AVM ISDN-
Controller B1 USB in Windows 95 is complete. You may
now begin working with the ISDN-Contoller.
Under ”Programs” in the Windows Start menu you will
now find a program group named ”AVM”. This group
contains the programs B1 Readme, B1 Setup, B1
Test, B1 Load, B1 Unload and AVM Internet Home
Page. The last of these is a link to AVM’s World Wide Web
server, and requires a browser and an Internet connection.