Operation Manual

15
2 Installation
• Next, enter the folder in which you want the driver
software for the ISDN-Controller B1 USB installed
on your computer. The default is C:\IDRIVER. You may
confirm this or enter any other path.
When you have entered the path to the desired folder,
click on Continue.
• In the next dialog, select the D channel protocol used
on your ISDN line (DSS1 or 1TR6). Click on Continue
to confirm your choice.
• The Setup program now copies all the necessary files
to the specified folder.
Afterward, a message box shows the current
configuration of the ISDN-Controller B1 USB. Click
on OK.
To complete the driver software installation, you must
restart Windows. Answer Yes at the corresponding
prompt. After this restart, the installation of the AVM
ISDN-Controller B1 USB in Windows 98 or Windows NT
5.0 is complete. You may now begin working with the
ISDN-Controller: see section 2.3.
Under ”Programs” in the Windows Start menu you will
now find a program group named ”AVM”. This group
contains the programs B1 Readme, B1 Setup, B1
Test, B1 Load, B1 Unload and AVM Internet Home
Page. The last of these is a link to AVM’s World Wide Web
server, and requires a browser and an Internet connection.
The B1 Setup program allows you to adjust the settings
for the D channel protocol, automatic loading of the ISDN-
Controller B1 USB and data compression, without
reinstalling the driver software. The document B1 Readme
contains the latest information on the ISDN-Controller
B1 USB. Use the program B1 Test to test your ISDN-
Controller B1 USB for correct installation and working
order.