Specifications

The ISDN-Controller B1 PCI v4.0 on Point-to-Point Lines
ISDN-Controller B1 PCI v4.0 – 13 Special Types of Lines 63
Windows Me/98/95 and OS/2
Perform the standard installation for your operating system
and exchange one single component of the driver. All nec-
essary components and information are contained in the
folder CARDWARE\B1_PCI\X_MISC on the ISDN-Controller
B1 PCI v4.0 installation CD.
Please note that CAPI applications like fax servers must al-
so be configured to interpret the DDI (Direct Dial-In) ISDN
numbers correctly. Consult the documentation of your ap-
plication for more information.
Novell NetWare 6.x, 5.x, 4.x and 3.x
Enable the “P2P” option in the menu for setting the D-chan-
nel protocol and restart Novell NetWare.
Linux
To operate the ISDN-Controller B1 PCI v4.0 at a point-to-
point BRI (P2P=Point-to-Point), just change the
/ETC/CAPI.CONF file manually. The same is true for multiple
ISDN-Controller B1 PCI v4.0.
An example of a modified “/etc/capi.conf” file:
# card file proto io irq mem cardnr options
#
B1pcib1.t4DSS1---- P2P