Specifications

Installing Additional Controllers
ISDN-Controller B1 PCI v4.0 – 12 Installation in OS/2 59
12.4 Installing Additional Controllers
Up to four active AVM ISDN-Controllers may be installed in
one system.
To add another ISDN-Controller B1 PCI v4.0, open the ISDN-
LOAD.CFG file from the driver software directory (default:
IDRIVER) in a text editor.
Copy the following section:
[ISDN-Controller-00]
:PROTOCOL= \xxx
Then switch off the computer and install the second ISDN-
Controller. Subsequent loading procedures will load all in-
stalled ISDN-Controllers.
Active AVM ISDN-Controllers for the ISA, PCI, PCMCIA buses
and USB can also be combined in the same system. When
registering an ISA controller in the ISDNLOAD.CFG file, also
define the I/O address and interrupt level of the ISA control-
ler and add the line Type=B1. For more information, see
the manual for the ISA controller or the corresponding
Readme file.
The “B1 Load” program loads all the controllers installed.
12.5 Removing the ISDN-Controller B1 PCI v4.0
To remove the ISDN-Controller B1 PCI v4.0 in OS/2, start the
installation program from the installation CD.
The program reports that an installed ISDN-Controller was
found. Select the “Uninstall” option in the next window and
follow the instructions on the screen.
The entries in the CONFIG.SYS file made during installation
are deleted.
Restart the computer to conclude the uninstallation of the
driver software.