Specifications

Installation in OS/2
56 ISDN-Controller B1 PCI v4.0 – 12 Installation in OS/2
12 Installation in OS/2
AVM no longer provides support for use of the ISDN-Control-
ler B1 PCI v4.0 with the OS/2 operating system and there is
no further development of the driver software.
For operation in OS/2 specially developed drivers are in-
cluded with delivery. Any existing OS/2 applications based
on CAPI 1.1 can also be used with this driver software. In-
formation on CAPI can be found in the section “The
CAPI 2.0 Application Interface” from page 66.
12.1 Installing the Driver Software
Proceed as follows to install the driver software in OS/2:
1. Insert the installation CD in your CD-ROM drive.
2. Open the SYSTEM directory and double-click “Drives”.
Then click the icon of your CD-ROM drive. Switch to the
directory below:
\CARDWARE\B1
PCI\OS2\ENGLISH
3. Start the INSTALL.EXE program.
4. An OS/2 command-line window opens and the instal-
lation program’s welcome screen appears. Press “Re-
turn”.
The installation can be aborted at any time by pressing
“Ctrl+x”.
5. In the next dialog you are asked whether the ISDN-
Controller B1 PCI v4.0 is to be loaded automatically
every time OS/2 is started. Enable the desired option
and confirm with “Return”.
6. Select the D-channel protocol used on your ISDN line:
DSS1 (Euro ISDN), NI1, 5ESS or 1TR6.
7. Next specify the directory in which the driver software
for the ISDN-Controller is to be installed.