Specifications

Installing Additional Controllers
ISDN-Controller B1 PCI v4.0 – 11 Installation in Linux 55
11.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer. Active AVM ISDN-Controllers for the ISA, PCI
and PCMCIA buses can also be combined in the same sys-
tem. It is not possible to use active and passive AVM ISDN-
Controllers (like FRITZ!Card PCI) at the same time. If you
would like to use an AVM DSL-Controller in addition to
ISDN-Controller B1 PCI v4.0, the AVM DSL-Controller must
be installed last.
To install an additional active AVM ISDN-Controller, simply
perform the installation for the desired controller again. An
individual configuration (D-channel protocol and line type)
can be assigned to each ISDN-Controller.
If using the ISDN-Controller B1 PCI v4.0 with the AVM ISDN-
Controller C4, note that the ISDN-Controller C4 consists of
four separate logical ISDN-Controllers (numbers 1 through
4). This means that whenever the ISDN-Controller
B1 PCI v4.0 is installed in a system with an ISDN-
Controller C4, the ISDN-Controller B1 PCI v4.0 is addressed
by the CAPI applications (like CAPI4HylaFAX) as CAPI con-
troller number 5.
Only CAPI applications which can be configured for multiple
ISDN-Controllers can be used. The CAPI4HylaFAX module
and the CAPI plug-in allow configuration for multiple con-
trollers.