Specifications

Installing Additional Controllers
48 ISDN-Controller B1 PCI v4.0 – 10 Installation in Novell NetWare 6.x, 5.x, 4.x and
10.5 Installing Additional Controllers
If you want to install additional ISDN-Controllers, enter at
the system console:
load b1setup
In the list of available ISDN-Controllers, press “Ins”. Each
time an ISDN-Controller is installed, another ISDN-Control-
ler is displayed, complete with an available I/O address
and interrupt level.
10.6 Removing the ISDN-Controller B1 PCI v4.0
To remove the ISDN-Controller B1 PCI v4.0 in Novell
NetWare 6.x, 5.x, 4.x or 3.12, proceed as follows:
1. Enter the following command at the system console:
load nwconfig
to load the installation menu of the Novell NetWare
server. The “Installation Options” menu of the configu-
ration program appears. Select the “Product Options”
item from the menu and press “Return”.
2. If you are removing the ISDN-Controller from a
NetWare 3.12 server, a list of the programs already in-
stalled appears.
If you are removing the ISDN-Controller from a
NetWare 6.x, 5.x or 4.x server, open the menu “Other
Installation Actions”. Select here the entry “View/Con-
figure/Remove installed products” and press “Re-
turn”. A list of the programs already installed is dis-
played.
3. Move the highlight to the entry for the AVM ISDN-Con-
troller B1 PCI v4.0 and press “Del”. Confirm with “Yes”.
4. Press “Esc” as often as necessary to close all sub-
menus and return to the “Configuration Options”
menu.
5. Select “Exit” to leave the installation program.
This concludes the uninstallation of the ISDN-Controller
B1 PCI v4.0 in Novell NetWare.