Specifications

Operation of the ISDN-Controller B1 PCI v4.0 with Stand-Alone CAPI
46 ISDN-Controller B1 PCI v4.0 – 10 Installation in Novell NetWare 6.x, 5.x, 4.x and
10.3 Operation of the ISDN-Controller B1 PCI v4.0
with Stand-Alone CAPI
Enter the following command at the system console to load
the ISDN-Controller:
load capi20
A message appears reporting that the ISDN-Controller has
been loaded and the CAPI interface is available.
When using NetWare 6.x, keep in mind that the display for
successful loading is shown in an extra console. This can
be accessed using the key combination “Alt+Esc”.
Enter the following command in order to unload the ISDN-
Controller:
load capi20 -d
The system displays a message confirming the action.
10.4 Operation of the ISDN-Controller B1 PCI v4.0
with CAPI for the CAPI Manager
Proceed as follows to configure and start operation of the
ISDN-Controller B1 PCI v4.0 with CAPI for the CAPI Manager:
Using NetWare 6.x, the ISDN-Controller B1 PCI v4.0 with
CAPI for the CAPI Manager can only be configured using the
“Small Business Edition”.
1. Enter the following command at the system console:
load inetcfg
2. The “Internetworking Configuration” window appears.
Select the “Boards” entry.
A list displays the ISDN-Controllers already configured.
3. To bind the ISDN-Controller into the operating system,
press the “Ins” key.
Please wait a moment.
4. In the “Select A Driver” dialog, select the “WHSMCAPI”
entry and press “Return”.