Specifications

Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
ISDN-Controller B1 PCI v4.0 – 10 Installation in Novell NetWare 6.x, 5.x, 4.x and 3.12
10 Installation in Novell NetWare 6.x, 5.x,
4.x and 3.12
Once the ISDN-Controller B1 PCI v4.0 has been physically
installed in your computer, the next step is to install the
driver software. You have the option of installation in the
NetWare versions 6.x, 5.x, 4.x and 3.12.
Two installation variants are supplied for Novell
NetWare 6.x, 5.x and 4.x: Stand-Alone CAPI and CAPI Man-
ager.
The CAPI Manager in Novell NetWare 6.x is only available
with the “Small Business Edition”. If you would like to use
the Novell CAPI Manager, make sure that it is installed be-
fore installing the ISDN-Controller B1 PCI v4.0.
For Novell NetWare 3.12, only the Stand-Alone CAPI driver
is available.
The Novell CAPI Manager is a part of the Novell
NetWare 4.x, 5.x and the “Small Business Edition” of Novell
NetWare 6.x operating systems and is supplied by Novell.
The installation and uninstallation procedures are almost
identical for both driver types and for all three Novell Net-
Ware versions. Configuration and operation of the ISDN-
Controller B1 PCI v4.0 is different depending on whether
the Stand-Alone CAPI or the CAPI Manager version is used.
10.1 Installing the Driver Software
Before you begin the driver installation in Novell
NetWare 4.x or 3.12, install the operating system patch
LANDR9 or higher, available from Novell.
The following installation instructions are valid for Novell
NetWare 5.x. Minor deviations may be required for installa-
tion in Novell NetWare 5.x, 4.x and 3.12.
In order to install the driver software, carry out the following
steps: