Specifications

Changing the Settings
36 ISDN-Controller B1 PCI v4.0 – 8 Installation in Windows Me
8.2 Changing the Settings
After installation has been concluded, you have the option
of changing the following settings of the ISDN-Controller
B1 PCI v4.0:
 D-channel protocol: DSS1 (Euro ISDN), NI1, 5ESS,
1TR6
 enable automatic data compression (CAPI SoftCom-
pression X75/V42bis)
Open the “B1 Setup” program from the “AVM” program
group and follow the instructions there.
Information on CAPI SoftCompression can be found in the
section “CAPI SoftCompression X75/V42bis” from page 71.
8.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer. Active AVM ISDN-Controllers for the ISA, PCI,
PCMCIA buses and USB can also be combined in the same
system.
To install an additional ISDN-Controller for the PCI bus, sim-
ply insert it in a suitable slot as described in “Installing the
ISDN-Controller B1 PCI v4.0” on page 12 and start Win-
dows. Make your settings in the dialogs as described in the
section “Installing the Driver Software” on page 33. That’s
all!
If you want to add an ISA-Controller, carry out the controller
installation procedure as described in the appropriate man-
ual. USB devices such as the B1 USB are recognized by the
Plug & Play mechanism.
The driver software for all installed ISDN-Controllers is load-
ed automatically when Windows starts.