Specifications

Installing Additional Controllers
32 ISDN-Controller B1 PCI v4.0 – 7 Installation in Windows NT
7.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer. Active AVM ISDN-Controllers for the ISA, PCI
and PCMCIA buses can also be combined in the same sys-
tem.
To install an additional ISDN-Controller for the PCI bus, sim-
ply insert it in a suitable slot as described in “Installing the
ISDN-Controller B1 PCI v4.0” on page 12 and start Win-
dows. Make your settings in the dialogs as described in the
section “Installing the Driver Software” on page 29. That’s
all!
If you want to add an ISA-Controller, carry out the controller
installation procedure as described in the appropriate man-
ual.
The driver software for all installed ISDN-Controllers is load-
ed automatically when Windows starts.
7.4 Removing the ISDN-Controller B1 PCI v4.0
Proceed as follows to remove the ISDN-Controller
B1 PCI v4.0 driver software in Windows NT:
1. Select “Start / Settings / Control Panel”, then double-
click the “Add/Remove Programs” icon.
2. The list of software installed includes an entry for the
“AVM ISDN-Controller B1 PCI”. Select this entry and
click the “Add/Remove...” button.
The uninstall program is started.
3. To conclude the uninstallation you will be prompted to
restart Windows NT so that the changes can take ef-
fect.
Rebooting the computer concludes the uninstallation.
Only one ISDN-Controller can be removed at a time. If you
have installed several ISDN-Controllers and want to remove
them all, then perform the procedure described here sever-
al times, without restarting Windows between each opera-
tion.