Specifications

Changing the Settings
ISDN-Controller B1 PCI v4.0 – 7 Installation in Windows NT 31
A new program group called “AVM” is created in the Pro-
gram Manager/Start menu. This program group contains
the files “AVM Internet Home Page” (Windows NT 4.0 only:
link to the AVM Internet pages), “B1 Readme”, “B1 Setup”
and “B1 Test”.
By default the ISDN-Controller B1 PCI v4.0 is loaded auto-
matically every time Windows NT is started. Because the
controller is loaded before the items in the “Startup” pro-
gram group, it is no problem to include communications
programs based on CAPI in the “Startup” group.
7.2 Changing the Settings
After installation has been concluded, you have the option
of changing the following settings of the ISDN-Controller
B1 PCI v4.0:
 D-channel protocol: DSS1 (Euro ISDN), NI1, 5ESS,
1TR6
 enable automatic data compression (CAPI SoftCom-
pression X75/V42bis)
Open the “B1 Setup” program from the “AVM” program
group and follow the instructions there.
Information on CAPI SoftCompression can be found in the
section “CAPI SoftCompression X75/V42bis” from page 71.