Specifications

Installing Additional Controllers
22 ISDN-Controller B1 PCI v4.0 – 5 Installation in Windows XP / Server 2003
4. Click the “Properties” command and select the “ISDN”
page.
5. Select the desired D-channel protocol on this settings
page and then click the “Configure...” button to enter
the Multiple Subscriber Numbers for the NDIS WAN
CAPI Driver.
If the current driver software from AVM is installed on your
system, the “Device Manager” includes an additional “Ad-
vanced” settings page which allows you to enable Direct
Dial-in.
5.3 Installing Additional Controllers
Up to four active AVM ISDN-Controllers can be installed in
your computer. Active AVM ISDN-Controllers for the ISA, PCI,
PCMCIA buses and USB can also be combined in the same
system.
To install an additional ISDN-Controller for the PCI bus, sim-
ply insert it in a suitable slot as described in “Installing the
ISDN-Controller B1 PCI v4.0” on page 12 and start Win-
dows. Make the entries described in the section “Installing
the Driver Software” on page 20. That’s all!
If you want to add an ISA-Controller, carry out the controller
installation procedure as described in the appropriate man-
ual. USB devices such as the B1 USB are recognized by the
Plug & Play mechanism.
The driver software for all installed ISDN-Controllers is load-
ed automatically when Windows XP starts.