Specifications

Installing the Driver Software
20 ISDN-Controller B1 PCI v4.0 – 5 Installation in Windows XP / Server 2003
5.1 Installing the Driver Software
Once the ISDN-Controller B1 PCI v4.0 has been installed in
your computer, it will be recognized automatically as a Plug
& Play device. Use the “Found New Hardware Wizard” to
configure the ISDN-Controller for operation. To do so, pro-
ceed as follows:
The following dialogs are part of the Windows XP operating
system. Consult the Windows XP manual wherever neces-
sary.
1. Start Windows XP.
2. The Windows XP Plug & Play mechanism automatically
recognizes the ISDN-Controller as the “Network Con-
troller”.
3. The “Add/Remove Hardware Wizard” is started. Con-
firm with “Next”.
4. First specify the D-channel protocol to be used: DSS1
(Euro ISDN), NI1, 5ESS or 1TR6 (obsolete). Confirm
with “Continue”.
5. Enter the desired multiple subscriber numbers in the
“Phone Number and SPID Information” window.
The settings performed are relevant only for the NDIS
WAN CAPI Driver (Internet, RAS over Dial-Up Network-
ing).
6. Confirm with “Next” and finally with “Finish”.
A message appears stating that you may start operation of
the ISDN-Controller immediately. This completes the initial
driver software installation for the ISDN-Controller
B1 PCI v4.0 in Windows XP.
Once the driver installation is concluded, the second step
is to update the driver software from the installation CD.
We recommend installing the current driver software from
the installation CD or the ADC.
1. Run the SETUP.EXE file.